ホーム > ショーリスト
その ジルコニアミリングボール are used to grind materials in the ceramic and chemical industries and are very popular in the food processing industry. It is a long-lasting and abrasion-resistant material that can be used in a variety of applications. These balls can withstand the corrosive effects of acids, chemicals, and abrasions while maintaining their properties at extremely high temperatures. They can also withstand the formation of rust and stains.
Grinding media made of yttrium-stabilized zirconia is ideal for high-velocity ナノボールミル. It has a density of 6050 kg m-3, making it one of the densest grinding media types. This is especially useful for a variety of applications, including attrition milling. Furthermore, it provides clean, long-lasting results. Furthermore, it is appropriate for both wet and dry grinding processes.
Zirconia balls have been crowned the best among all possible grinding media types for a variety of reasons. They have a more delicate internal crystal structure and better size distribution and wear resistance. Furthermore, they are a credible alternative to stainless steel media. But exactly what is a zirconia ball?
Various manufacturing processes necessitate a wide range of shapes and sizes. The most important thing to remember is that each grinding machine necessitates a unique type of media. A vertical or horizontal milling machine, for example, will require a different size and shape. Similarly, the speed of the stirrer tip will have an effect on the outcome.
Although the term "zirconia ball" has a negative connotation, these balls are extremely durable and strong. Furthermore, when compared to low-density materials, they can withstand heat and corrosion. They are not resistant to sulphuric or hydrofluoric acid, despite their superior performance. Nonetheless, they are resistant to the majority of acids and organic solvents.
The contact surface area between ジルコニアミルボール and fibers can influence ball-milling performance. A large number of milling balls with varying diameters can result in a variety of contact angles between the milling balls and long fibers.
This can result in smaller, more brittle particles. Because the fibers are easily fractured, lower moisture content in the pulp fiber results in smaller particles. As a result, a higher milling ball to cellulose pulp mass ratio increases the contact surface area.
Several studies have been conducted to investigate the drawbacks of mechanical nanotechnology. These include the nanomaterial's high water and energy consumption, its irregular shape, and the waste water produced. Furthermore, the process takes a very long time.
Researchers studied the effect of ball milling on a sample of cellulose powders to better understand the process. To achieve the desired particle size and MC, different ball sizes and rotational speeds were used. They also looked into the effect of ball milling on the formation of SSAs.
SEM images of samples were examined after milling. CNFs, large fibers, and cellulose particles were the three main products found. All of the images demonstrated the formation of cellular nanofibers (CNFs).
In the production of CNFs, the mass ratio of ジルコニア研磨ボール to cellulose pulp is an important factor to consider. The mass ratio is calculated by dividing the mass of the pulverized pulp fiber (kg) by the mass of the milling ball (g). The mass of the milling ball determines this mass ratio. A high mass ratio means that the milling ball has more direct contact with the cellulose pulp. As a result, it is critical to design a mass ratio that corresponds to the desired size of the CNFs.
Ball milling has been proposed as a method for producing CNFs in large quantities from renewable resources. However, there are several influencing factors that influence CNF yield. An analysis was performed using the one-way Analysis of Variance (ANOVA) and single factor analysis to better understand the relationship between these factors.
A series of experiments were carried out to investigate the effect of each factor on CNF yield. The specific tensile strength of WNFs was found to be dependent on the number of milling balls used, the degree of hydrolysis, and the cellulose particle size. Similarly, the ball to cellulose mass ratio influenced the work capacity of the WNFs.
Tencan has a manufacturing plant that covers 220,000 sq. meters and an R&D center that is 2,000 sq. m. Tencan can satisfy all demands of its customers in complete terms. Tencan is the owner of over 30 patents, and has a partnership with 20 doctors at five prestigious universities.
The company's core business is the manufacture of powder equipment technology, as well as powder materials. Our main products are laboratory planetary ballmills, crushing and milling machines, ジルコニアミリングビーズ, screening and mixing and stirring equipment, and other lab equipment like gloves boxes and scientific research equipment.
The company has received ISO9001 Quality Management System, CE and SGS certifications and more than 40 patents on core technologies that have independent intellectual rights. The government has declared it an "high technology enterprise in Hunan Province".
The primary customer segments are universities, research institutes and companies that are based on technology, serving 20,000+ customers worldwide, and exporting to 60+ countries.
EN 
NL
FR
DE
HI
IT
KO
PL
PT
RU
ES
TR
AR
BG
HR
CS
DA
FI
EL
JA
NO
RO
SV
IW
ID
LV
LT
SR
SK
SL
UK
VI
ET
HU
UZ
TH
FA
MS
BE
HY
AZ
KA
MN
MY
KK
TG
